✨ New Arrivals Just Dropped!Explore
SunStar Adjustable Wall/Ceiling Mounting Kit for Patio Heaters - Black
SunStar Adjustable Wall/Ceiling Mounting Kit for Patio Heaters - Black
| The SunStar black adjustable wall/ceiling mounting kit (part 560352) provides versatile installation options for all SunStar GLASS series patio heaters. The mounting arm adjusts from 15 to 30 inches in length, and the bracket allows angle installation from 15 to 60 degrees, letting you direct heat precisely into seating zones. Designed for 7 to 10 ft. mounting heights on the SGL35 and MGL35 series, and 8 to 11 ft. on the SGL50 series. The kit can be mounted to walls, ceilings, or structural beams. Finished in high-temperature black powder coat to match the SGL series heaters. Use this kit when your SunStar heater was purchased without a mounting kit, or as a replacement for a damaged or worn mount. |
The SunStar Advantage
| SunStar GLASS represents the next generation of overhead gas infrared patio heating, engineered from the ground up by a dedicated team in Charlotte, North Carolina. Here is what sets SunStar apart from every other overhead gas heater on the market: 40 MPH Wind-Resistant Tinted Glass Face: The defining feature of SunStar GLASS. A high-temperature tinted glass panel protects the ceramic burner from wind gusts up to 40 MPH - far exceeding the wind tolerance of open-face competitors like Sunpak or standard infrared heaters. The tinted glass also enhances the heater's visual appeal, creating a sleek, modern aesthetic that blends into upscale architecture. Two-Stage Output (Standard on Every Heater): Every SunStar GLASS heater ships factory-configured for two-stage operation. Start on High to warm a chilled patio quickly, then dial down to Low as guests get comfortable. This saves fuel and prevents overheating on milder evenings. Can also be jumpered for single-stage full-power operation. Ceramic Infrared Burner Technology: SunStar uses a ceramic burner that produces clean, efficient infrared radiant energy. Like the warming rays of the sun, infrared heat warms people, tables, chairs, and floors directly at floor level rather than wastefully heating the surrounding air. Versatile Mounting from 0 to 60 Degrees: SunStar heaters mount horizontally or at angles up to 60 degrees from horizontal, giving installers maximum flexibility to direct heat precisely into seating zones. Wall mount, ceiling mount, or pole mount configurations available. Electronic Ignition with 120 VAC: Standard 120V electrical connection powers the electronic ignition system - no low-voltage transformer required like competing brands. Simple, reliable, and easy for your electrician to wire. Weather-Resistant Construction: SGL models feature zinc-plated steel with high-temperature silicone powder-coated black paint. MGL marine grade models upgrade to 316 stainless steel for superior corrosion resistance in coastal and saltwater environments. Made in the USA: Proudly engineered and manufactured in Charlotte, North Carolina by SunStar Heating Products. |
Manufacturer Downloads
Warranty InformationSunStar offers a three (3) year limited warranty on burner assemblies and a one (1) year warranty on controls from the original date of purchase. This warranty covers defects in materials and workmanship under normal use. Labor is not included. Refer to the manufacturer's installation manual for complete warranty details. |
SunStar Adjustable Wall/Ceiling Mounting Kit for Patio Heaters - Black | |
|---|---|
| Part Number | 560352 |
| Type | Adjustable Wall/Ceiling Mounting Kit |
| Color | Black |
| Arm Length | Adjustable 15 to 30 in. |
| Angle Range | 15 to 60 degrees |
| Mounting Height | 7-10 ft. (SGL35/MGL35), 8-11 ft. (SGL50) |
| Compatibility | All SunStar SGL35, SGL50, and MGL35 series |
| Warranty | 1-Year |
| Made In | USA |
$77.00
Original: $220.00
-65%SunStar Adjustable Wall/Ceiling Mounting Kit for Patio Heaters - Black—
$220.00
$77.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
SunStar Adjustable Wall/Ceiling Mounting Kit for Patio Heaters - Black
| The SunStar black adjustable wall/ceiling mounting kit (part 560352) provides versatile installation options for all SunStar GLASS series patio heaters. The mounting arm adjusts from 15 to 30 inches in length, and the bracket allows angle installation from 15 to 60 degrees, letting you direct heat precisely into seating zones. Designed for 7 to 10 ft. mounting heights on the SGL35 and MGL35 series, and 8 to 11 ft. on the SGL50 series. The kit can be mounted to walls, ceilings, or structural beams. Finished in high-temperature black powder coat to match the SGL series heaters. Use this kit when your SunStar heater was purchased without a mounting kit, or as a replacement for a damaged or worn mount. |
The SunStar Advantage
| SunStar GLASS represents the next generation of overhead gas infrared patio heating, engineered from the ground up by a dedicated team in Charlotte, North Carolina. Here is what sets SunStar apart from every other overhead gas heater on the market: 40 MPH Wind-Resistant Tinted Glass Face: The defining feature of SunStar GLASS. A high-temperature tinted glass panel protects the ceramic burner from wind gusts up to 40 MPH - far exceeding the wind tolerance of open-face competitors like Sunpak or standard infrared heaters. The tinted glass also enhances the heater's visual appeal, creating a sleek, modern aesthetic that blends into upscale architecture. Two-Stage Output (Standard on Every Heater): Every SunStar GLASS heater ships factory-configured for two-stage operation. Start on High to warm a chilled patio quickly, then dial down to Low as guests get comfortable. This saves fuel and prevents overheating on milder evenings. Can also be jumpered for single-stage full-power operation. Ceramic Infrared Burner Technology: SunStar uses a ceramic burner that produces clean, efficient infrared radiant energy. Like the warming rays of the sun, infrared heat warms people, tables, chairs, and floors directly at floor level rather than wastefully heating the surrounding air. Versatile Mounting from 0 to 60 Degrees: SunStar heaters mount horizontally or at angles up to 60 degrees from horizontal, giving installers maximum flexibility to direct heat precisely into seating zones. Wall mount, ceiling mount, or pole mount configurations available. Electronic Ignition with 120 VAC: Standard 120V electrical connection powers the electronic ignition system - no low-voltage transformer required like competing brands. Simple, reliable, and easy for your electrician to wire. Weather-Resistant Construction: SGL models feature zinc-plated steel with high-temperature silicone powder-coated black paint. MGL marine grade models upgrade to 316 stainless steel for superior corrosion resistance in coastal and saltwater environments. Made in the USA: Proudly engineered and manufactured in Charlotte, North Carolina by SunStar Heating Products. |
Manufacturer Downloads
Warranty InformationSunStar offers a three (3) year limited warranty on burner assemblies and a one (1) year warranty on controls from the original date of purchase. This warranty covers defects in materials and workmanship under normal use. Labor is not included. Refer to the manufacturer's installation manual for complete warranty details. |
SunStar Adjustable Wall/Ceiling Mounting Kit for Patio Heaters - Black | |
|---|---|
| Part Number | 560352 |
| Type | Adjustable Wall/Ceiling Mounting Kit |
| Color | Black |
| Arm Length | Adjustable 15 to 30 in. |
| Angle Range | 15 to 60 degrees |
| Mounting Height | 7-10 ft. (SGL35/MGL35), 8-11 ft. (SGL50) |
| Compatibility | All SunStar SGL35, SGL50, and MGL35 series |
| Warranty | 1-Year |
| Made In | USA |
